Online Servos
0 servos
Results from the last scan
CANBUS SERVO · V0.2.2
Servo Monitor
Scan CAN Bus servos and view live operating status
Activity
Active Servo
Shared target for monitoring, control, and configuration
CAN Baud Rate
500K
Current adapter setting
Scan Servos ID Range · CAN Baud Rate
Ready
Waiting to scan…
Servo Status Live Data
Multi-turn Angle-- °
Turn Count-- turns
Firmware--
Voltage-- V
Current-- mA
Power-- mW
Temperature-- °C
Servo Status--
Waiting for data
CAN Baud Rate--
Position & Calibration
-- °
Use with Care
Motion Control Multi-turn · Simple
Mode Selection
Target Position
Motion Parameters
Position Move ReadyApply the mode, target position, and motion parameters above
Independent DampingApplies damping immediately; position settings above are not used
Stop Control
Hold TorqueStop and hold the current position
Release TorqueStop and release torque
Stop with DampingStop the current move and apply damping at the specified power
Live Charts Voltage · Current · Power · Temperature
Not started
Voltage (V)
Current (mA)
Power (mW)
Temperature (°C)
Configuration
Communication Frames HEX STREAM
0 frames